bi ltd

Main Page Picometer Elli Imaging Elli Img. Enh. Elli Modular System

About Us Contact Us

 

Modular System Components

Light Sources

He-Ne Laser:

2 mW or 5 mW (the latter is recommended for weakly reflecting surfaces)

Laser Diode: More compact than He-Ne laser. Wavelength and output power can be specified.

Quartz-Halogen: 75 W lamp in Kohler illumination lamp housing. Current regulated power supply (l > 400 nm)

Xe Arc: 75 W Xe high pressure arc lamp, air cooled, with starter and power supply. EMF shielded. (l > 200 nm)

Spectral Selection

Interference Filters: 50 - 10 nm bandwidth, all standard wavelengths available

Filter Wheel: automatic change of filter (specify configuration)

Monochromator Focal length 100 mm, f4, typ. resolution 4 nm (200 nm < l < 850 nm)

Polarisers and Retarders

Polaroid: Low-cost, for visible spectrum and near UV

Rotating Retarder: Single wavelength or achromatic. Low vibration rotation stage w. microcontroller interface

Birefringence Modulator: 3 component high stability design, 50 kHz modulation frequency (l > 200 nm)

Optics

Microscope Objective: Please contact us for more information!

Detectors

Photomultiplier: 11 stage Thorn EMI end-on type, S-20 response, with housing and high voltage power supply (180 < l < 950 nm)

Si Photodiode: UV-enhanced Si diode with low-noise preamp, separate AC/DC outputs. (180 < l < 1100 nm)

CCD Camera: 12-bit digital, 256x256 pixel, > 100 frames/s; PCI framegrabber board and software. (200 < l < 1200 nm)

Mounting System

Goniometer Table: Vertical mount, 360° rotation. Angular resolution 1/20 degree. Step motor arm drive with control unit. High rigidity design for direct mounting of all components.

Sample Mounts: All Modular System components are precision mounted in fixed height optical track mounts. Blank mounts available for customer modifications.

Sample Stage: Standard xyz mount, 25 mm travel.
Computer controlled scanning stage available.

Interface

Microcontroller: Provides true background real-time data acquisition w. lock-in interface and 6 additional analog inputs (12 and 16-bit versions available; acquisition rate 60 kHz max) and 2 analog outputs. 3 stepping motor drivers for standard 4-phase stepping motors. Can be used as interface to Lock-In, Birefringence Modulator, monochromator, filter wheels, Arm drive, retarder, polariser, and custom devices.
Connection to host computer via standard serial port (max. data rate 57,600 baud).

Computer: Pentium II computer under WindowsNT. Options: Printer, ZIP/JAZ drive.

Software IgorPro data analysis and visualisation software from WaveMetrics with custom extensions.

Contact us if a component you need is not on this list.

Specifications are subject to change without notice.

Previous
Back to Main Page

© beaglehole instruments 1998,1999
All material on this page is copyright. Last updated: Thursday, 18 January 2001